Grass Valley 3e CameraMan - Manual (Page 14)

Chapter 1
6 CameraMan 3e 3-CCD Camera Installation and Operations Manual
3-CCD Camera Components
This section includes a description of each part that
came with the CameraMan 3e 3-CCD Camera.
CameraMan 3e 3-CCD
Camera
FIGURE 1.4 Front and Rear View of Camera
The camera and its integrated intelligent pan/tilt sys-
tem is the primary component, and the basis for all
of Grass Valley’s CameraMan camera systems.
Mini Docking Station
FIGURE 1.5 Mini Docking Station
The Mini Docking Station should be attached to the
back of the camera. This box is the point of connec-
tion for all RS-232 and RS-485. The only time this
box needs to be removed is if the camera is
upgraded to a Presenter Camera System.
Note: If a Presenter System was purchased, the
Mini Docking Station is not needed.