Grass Valley Acappella v.3.1.0 - Manual (Page 95)

Acappella — Instruction Manual 95
SNMP Monitoring
Source and Destination Signal Loss Configuration
Digital signal loss SNMP traps are configured using the Acappella web
pages. The SNMP settings are only available if SNMP is licensed on that
matrix. Analog signal loss cannot be detected or reported.
The web pages available for configuration depend on the matrix type. For
example, if the matrix is digital video only, there will be no AES configura-
tion web page.
Video Destination and Source SNMP configuration is accessed via the
Video Config web page ( Figure 52 and Figure 53 ). AES SNMP is accessed via
the AES Config web page ( Figure 54 on page 97 and Figure 55 on page 98 ).
Clicking on the Go to Input Config or Go to Output Config button toggles the
display between the Source and Destination configuration pages. The
Signal Alarm can be turned on or off for each Destination and Source.
Figure 52. Video Destination SNMP Configuration