Router reference configuration page – Grass Valley Acappella v.3.1.0 User Manual
Page 73
Acappella — Instruction Manual
73
Acappella Configuration Pages
Router Reference Configuration Page
Router Reference Configuration Page is used to make adjustments to the
reference signal when the signal is out of zero time with the Source signals.
Figure 39. Router Reference Configuration Page
Minus 1
Minus 10
Plus 1
Plus 10
Save
Minus to Minimum
Plus to Max.
The video reference adjustments are set using the indicators as shown. The
bar on the bottom of the indicator will move to the left and right to show
how the current adjustment relates to the total range. There are two indica-
tors, one for Vertical Offset and one for Horizontal Offset. With Offsets set
to zero (0), switches occur with respect to reference input.
The default setting depends on your reference signal; NTSC is middle of
line 10, PAL is middle of line 6, and Tri-Level is middle of line 7.
The Audio Reference default is to use the Video Reference. To use an AES
signal as the Audio Reference select
AES Src1
. See
for signal cabling requirements. If AES Src 1 is selected and the
signal connected to Source 1 is either not a continuous feed or is missing
then
Invalid
will appear. If the signal is connected correctly and is the right
type then
AES Present
will appear.