Grass Valley Acappella v.3.1.0 - Manual (Page 46)

46 Acappella — Instruction Manual
Section 4 — Software and Configuration
Default System IP Addresses
Acappella systems ship with default IP addresses shown in Table 1 .
Table 1. Acappella System Default IP Addresses
Device IP Address Subnet Mask Gateway
Acappella Matrix Frame 192.168.0.40 255.255.255.0 192.168.0.1
Acappella Remote Panel 192.168.0.41 255.255.255.0 192.168.0.1
User Provided PC
(recommended setting) 192.168.0.1 255.255.255.0 192.168.0.1
If your Acappella system has multiple frames and/or multiple remote
panels, these defaults will need to be changed. See
Setting IP Addresses on
page 52 for specific instructions.
Software
Acappella ships with a software CD. Several applications on the CD enable
you to make adjustments to the Acappella configuration. After you have
added a PC to the Acappella network, you need to install the Acappella
software on the PC.
Software Installation
The Acappella Software CD will install the Acappella Matrix software,
Acappella Remote Panel software, NetConfig application (a Network Con-
figuration Tool), NetConfig Instruction Manual, and the Acappella Instruc-
tion Manual on a PC.
1. Insert Acappella Software CD, it will autostart. If the CD does not start
look for the Setup.exe file.