Grass Valley Acappella v.3.1.0 - Manual (Page 80)

80 Acappella — Instruction Manual
Section 4 — Software and Configuration
The following settings come from the factory with default settings. User
adjustments can be made to these settings. The default settings can be
restored on the
Remote Panel Network Configuration page.
Panel Background Button Intensity:
This setting is used to adjust the button background brightness. This is pri-
marily used to illuminate the panel so the buttons can be seen in a dark
environment.
Panel Dim Button Intensity:
This setting is used to adjust the button brightness at Low Tally.
Panel Display Intensity:
This setting is not used.
Panel Console Baud Rate:
This setting is used to adjust the Baud rate.
Save New Settings
This button saves changes to the Router Name , Local Panel Dim Button Intensity,
Panel Display Intensity, and Panel Console Baud Rate fields (reset is required to
save Baud Rate changes). To view changes after clicking the Save New Set-
tings button, click on the Refresh button.
Note Intensity changes do not need panel reset, changes are saved by pressing
Enter.