Grass Valley LDK 5309 - Manual (Page 17)

LDK 5309/10 9-inch LCD HD color viewfinder User’s Guide (v1.0) 17
Chapter 2 - Installation
Chapter 2
Installation
2.1 Attaching the quick mount support
Note
For improved viewfinder stability it is recommended to exchange the existing quick
mount block with the supplied quick mount support.
To attach the quick mount support to the camera adapter proceed as follows:
1. Loosen the four (Torx 15) screws from the existing quick mount block and
remove the block from the camera adapter.
2. Fit the quick mount support into the hole and fasten the support using the four
existing screws and two supplied (Torx 20) screws at the sides.
(2) Attach

quick mount
support
(1) Remove
quick mount
block