Grass Valley 2030RDA - Manual (Page 29)

2030RDA Instruction Manual 29
Status Monitoring
In general, LED colors used on the frame and modules indicate:
• Green – normal operation, (Pass) or signal present, module locked.
• Red – On continuously = fault condition, flashing = configuration error.
• Yellow – On continuously = active condition (configuration mode or
communication), flashing in sequence = module locator function.
Status LEDs for this module are described in LEDs on page 28 . LEDs for the
2000NET module are described in the 2000NET Network Interface Instruction
Manual.
Frame Alarm
Connection and use of the Frame Alarm (3 RU frames only) is covered in
detail in the 2000NET Network Interface Instruction Manual.
Web Browser Interface
When the 2000NET module is installed in the frame, a web browser GUI
can indicate frame and module status on the following web pages:
• Frame Status page – reports overall frame and module status in graph-
ical and text formats.
• Module Status page – shows specific input and reference signal status
to the module along with enabled options and module versions.
• A Status LED icon on each web page to report communication status
for the frame slot and acts as a link to the Status page where warnings
and faults are displayed (2000NET version 3.0 or later).
In general, graphics and text colors used indicate the following:
• Green = Pass – signal or reference present, no problems detected.
• Red = Fault – fault condition.
• Yellow = Warning – signal is absent, has errors, or is mis-configured.
• Grey = Not monitored (older 2000 module).
• White = Not present.
Status reporting for the frame is enabled or disabled with the configuration
DIP switches on the 2000NET module. Most module status reporting items
can be enabled or disabled on individual configuration web pages.