Grass Valley 2030RDA - Manual (Page 14)

14 2030RDA Instruction Manual
Configuration and Monitoring
Configuration and Monitoring
The 2030RDA can be configured locally using on-board switches or
remotely using the 2000NET network interface GUI or a Newton Control
Panel. Operation of these control types is explained in detail in their respec-
tive sections of this manual.
Note Not all available functions are configurable with the local on-board controls.
Refer to the following sections for configuration instructions:
• Configuration Summary ( page 14 )
• Local On-board Configuration ( page 15 )
• Remote Configuration and Monitoring ( page 16 )
Configuration Summary
The configuration parameters and monitoring functions available with the
local on-board jumpers, web browser interface, and the Newton Control
Panel are summarized in
Table 3 . The parameter defaults, choices, ranges,
and resolution are provided for each function.
Table 3. Summary of 2030RDA Configuration Functions
Function
Type
Default
Range/Choices
Resolution
Web Page/
Function Name
On-Board
Jumper Setting
Newton
Control
Panel
Mode Auto
Auto
Manual
Bypass
Standard Selections/
Mode Pulldown
JP25 pins 1-2 = AUTO
JP25 pins 2-3 = BYPASS
Mode
Manual standard
selection
–
Manual 143Mb
Manual 177Mb
Manual 270Mb
Manual 360Mb
Standard Selections/
Mode Pulldown/
Manual mode
No on-board manual
selections available.
StdSel
Recall factory
defaults
– See Default column
Recall Factory Defaults
Recall Fact.
Default button
N/A N/A