Installation, Module placement in the frame – Grass Valley 2000GEN User Manual
Page 6
6
2000GEN Instruction Manual
Installation
Installation
The 2000GEN module can be plugged in and removed from a Kameleon
Series frame with power on. When power is applied to the module, LED
indicators reflect the initialization process (see
).
Module Placement in the Frame
There are six cell locations in central control module section of the 3 RU
frame to accommodate network and reference modules. The 2000GEN
module plugs into Slot 15 (see
). The 1 RU frame has two central
control module slots. Slot 6 is used for the 2000GEN module.
1.
Install the module by inserting it into the appropriate slot of the frame.
2.
Verify that the module connector seats properly against the midplane
connector.
3.
Press the module ejector tab to seat the module in the slot.
Figure 1. 2000GEN Module Frame Slots
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(1)
(15)
8172-01
Network Slot (13)
Genlock Timing Slot (15)
Front Media Slots (1-12)
(2)
(3)
(4)
(6)
(1)
(5)
8172-03
Network Slot (5)
Genlock Timing Slot (6)
Front Media Slots (1-4)
3 RU Frame
1 RU Frame