Grass Valley 2000GEN - Manual (Page 11)

2000GEN Instruction Manual 11
Remote Control and Monitoring
To navigate to one of the device’s pages click on any of the device’s sub-list
of links. This will update the content display to the right.
Note To update status, HTML pages must be manually refreshed by clicking on the
Refresh button. Changes made at the frame or from other browsers on the
network will not be displayed until the page is refreshed.
Using the web browser’s reload function will always return you to the
Frame Status page. To refresh a particular page, always click on that page’s
Refresh button to the right of the page name.
The Online Manual Link will open a .PDF version of the appropriate
instruction manual if you have set up an Online Manual Server as
described in the 2000NET manual.
Module Links and Configuration Displays
The 2000 GUI provides the following links and displays for the 2000GEN
module (
Figure 5 ):
• Status display showing overall module status,
• Genlock Status display showing genlock status,
• Settings display for configuring the module parameters,
• Slot Config display showing slot identification and status reporting,
and
• Software Update display.
The Module Configuration displays operate in the same manner for all
remote controllable 2000 modules. Refer to the 2000NET manual for more
information on these displays. Some functions listed may not be supported
by a particular module. These will be indicated as not supported.
Figure 5. 2000GEN Display Links