H3C Technologies H3C Intelligent Management Center - Manual (Page 128)

119
• Upgrade the current software version of all CPEs whose class is MSR20–10 to the latest
version—V1.5.
• When a MSR20–10 CPE accesses the company network for the first time, deploy the latest version
(V1.5) of CPE software to it.
The network topology of the CPE devices for this example is shown in Figure 18 .
Figure 18 Network topology of CPE devices—Example 2
Task analysis
To execute this scenario, perform the following tasks:
1. Configure BIMS information on CPE devices.
2. Import the new software version to BIMS.
3. Create a software deployment task for upgrading the software on the MSR20–10 CPEs managed
by BIMS.
4. Create an automatic software deployment task to deploy the new version of software to the
newly-added MSR20–10 CPEs.
The process of automatically deploying a CPE through BIMS is shown in Figure 19 .