H3C Technologies H3C Intelligent Management Center - Manual (Page 114)

105
Figure 11 CPE Asset Report
CPE Asset Report fields:
• CPE Name—CPE name.
• IP Address—CPE IP Address.
• Vendor—CPE vendors.
• OUI—Organizationally Unique Identifier of the CPE vendor.
• Serial ID—CPE serial ID.
• Hardware Version—CPE hardware version.
• Software Version—CPE software version.
CPE Connectivity Count Report
A CPE connectivity count report displays connection statistics of the specified CPEs in a schedule.
To add a CPE connectivity count report, configure the following parameters:
• CPE Group—Click the Set Parameter icon . The Set Parameter page appears. Select a CPE
group or All CPEs for statistics collection, and then click OK.
• Begin Time—Click the Set Parameter icon . The Set Parameter page appears. Select the report
start time, and then click OK.
• End Time—Click the Set Parameter icon . The Set Parameter page appears. Select the report
end time, and then click OK.
Figure 12 shows a CPE connectivity count report.