H3C Technologies H3C SecPath F5020 - Manual (Page 5)

Network topology icons
Represents a generic network device, such as a router, switch, or firewall.
Represents a routing-capable device, such as a router or Layer 3 switch.
Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports
Layer 2 forwarding and other Layer 2 features.
Represents a security product, such as a firewall, UTM, multiservice security gateway, or
load-balancing device.
Represents a security card, such as a firewall, load balancing, NetStream, SSL VPN, IPS,
or ACG card.
Port numbering in examples
The port numbers in this document are for illustration only and might be unavailable on your device.
About the H3C firewall documentation set
The H3C firewall documentation set includes:
Category Documents Purposes
Product description and
specifications
Marketing brochures Describe product specifications and benefits.
Hardware specifications
and installation
Compliance and safety
manual Provides regulatory information and the safety
instructions that must be followed during installation.
Quick start
Guides you through initial installation and setup
procedures to help you quickly set up and use your
device with the minimum configuration.
Installation guide
Provides a complete guide to hardware installation
and hardware specifications.
Card manuals Provide the hardware specifications of cards.
H3C transceiver modules
user guide
Guides you through installing
SFP/SFP+/XFP/QSFP+/CFP/CXP transceiver
modules and CX4 cables.
Software configuration
Configuration guides
Describe software features and configuration
procedures.
Command references
Provide a quick reference to all available
commands.