H3C Technologies H3C SecPath F5020 - Manual (Page 3)

Preface
The H3C firewall devices configuration guides (Comware V7) describe the software features and
configuration procedures for the Comware V7-based firewall devices in " Applicable devices ." These
guides also provide configuration examples to help you apply software features to different network
scenarios.
The Layer 2—WAN Access Configuration Guide describes WAN access fundamentals and
configuration. It describes how to configure PPP and L2TP.
This preface includes:
• Applicable devices
• Audience
• Conventions
• About the H3C firewall documentation set
• Obtaining documentation
• Technical support
• Documentation feedback
Applicable devices
This document applies to the following firewall devices:
Product series Model Device type
H3C SecPath F5000 firewalls F5020/F5040
Centralized IRF devices. These
devices support IRF.
H3C SecPath M9000 multiservice
security gateways
M9006/M9010/M9014
Distributed devices. These devices
support IRF. They can operate in
one of the following modes:
• Standalone mode—The device
cannot form an IRF fabric with
other devices.
• IRF mode—The device can form
an IRF fabric with other devices.
H3C SecPath virtual multiservice
security gateways
VFW1000
Centralized devices. These devices
do not support IRF.
Audience
This document is intended for:
• Network planners.
• Field technical support and servicing engineers.
• Network administrators working with the firewall devices.