H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 18)

12
7. Mount the AP on the hook on the wall-mounting bracket. See callout 1
in Figure 10 .
8. Pull down the AP with force until it clicks into place. See callout 2
in
Figure 10 .
Figure 10 Fix the AP onto the wall-mounting bracket
Mounting the AP on a ceiling
NOTE:
•
The ceiling tiles must be less than 18 mm (0.71 in) thick, and the ceiling
can bear a weight of at least 5 kg (11.02 lb).
• Do not use this method to mount the AP to a location made of
low-intensity materials such as a plaster ceiling. If this installation
method is required in such an environment, put a high-intensity plate
beneath the ceiling to secure the installation.
The three bolt holes shown in Figure 11 are needed for mounting the AP on a
ceiling.