H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 15)

9
Figure 5 Mounting the AP on the table
Mounting the AP on a wall
To mount the AP on a wall, you need a wall-mounting bracket and wall anchor
kit.
Figure 6 Screw hole locations and sizes (in mm)
(1) Hook (2) Mounting hole
(3) Clip (4) Mounting clip
CAUTION:
Connect the AP to the network by using an Ethernet cable, and then install
the AP to the wall-mounting bracket.
1 2
3
4
Ø5.0
86.0
136.0