H3C Technologies H3C MSR 5600 - Manual (Page 79)

71
the status of track entry 1. When the status of the track entry becomes Negative, the priority of
Router A decreases by 20.
[RouterA] interface ethernet 1/2
[RouterA-Ethernet1/2] vrrp vrid 1 virtual-ip 192.168.0.10
[RouterA-Ethernet1/2] vrrp vrid 1 priority 110
[RouterA-Ethernet1/2] vrrp vrid 1 track 1 reduced 20
[RouterA-Ethernet1/2] return
4. Configure VRRP on Router B:
# Create VRRP group 1, and configure the virtual IP address of the group as 192.168.0.10.
system-view
[RouterB] interface ethernet 1/2
[RouterB-Ethernet1/2] vrrp vrid 1 virtual-ip 192.168.0.10
[RouterB-Ethernet1/2] return
Verifying the configuration
# Display detailed information about the VRRP group on Router A.
display vrrp verbose
IPv4 Virtual Router Information:
Running Mode : Standard
Total number of virtual routers : 1
Interface Ethernet1/2
VRID : 1 Adver Timer : 100
Admin Status : Up State : Master
Config Pri : 110 Running Pri : 110
Preempt Mode : Yes Delay Time : 0
Auth Type : None
Virtual IP : 192.168.0.10
Virtual MAC : 0000-5e00-0101
Master IP : 192.168.0.101
VRRP Track Information:
Track Object : 1 State : Positive Pri Reduced : 20
# Display information about track entry 1 on Router A.
display track 1
Track ID: 1
State: Positive
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Tracked object:
BFD session mode: Echo
Outgoing interface: Ethernet1/1
VPN instance name: -
Remote IP: 1.1.1.2
Local IP: 1.1.1.1
# Display detailed information about the VRRP group on Router B.
display vrrp verbose
IPv4 Virtual Router Information:
Running Mode : Standard