Electrolux 134709300 - Manual (Page 23)

23
Reversing Door
I) Reattaching Latch Plate
1 Rotate latch plate and move to opposite side
of door above indicator.
2 Reattach with 2 long, course-thread,
counter-sunk screws.
J) Reattaching Hinge
1 Rotate hinge and move to opposite side of
door above hole plug.
2 Reattach with 4 long, course-thread,
counter-sunk screws.
K) Reattaching Door to Front Panel
1 Use side locating pins to align hinge and
install 1 short, fine-thread, counter-sunk
screw in center hole of hinge side.
2 Install other 2 short, fine-thread, counter-
sunk screws in upper and lower holes of
hinge side.
3 Install 2 short, course-thread, panhead
screws through face of hinge plate.
4 Close door and test operation of latch.