Electrolux 134709300 - Manual (Page 20)

20 Reversing Door
C) Reversing Hardware on Front Panel
1 Remove 2 short, course-thread, panhead
screws from striker and 2 plastic hole plugs.
2 Rotate striker and move to opposite
opening. Attach with 2 short, course-thread,
panhead screws.
3 Install original plastic hole plugs or use new
plugs supplied with dryer.
D) Removing Door Hardware
1 Remove 2 long, course-thread, counter-sunk
screws and latch plate. Set latch aside.
2 Remove 4 long, course-thread, recessed
screws and hinge. Set hinge aside.
Reversing door