H3C Technologies H3C S5820V2 Series Switches User Manual

Page 22

The output shows that the MCE has learned the private routes of VPN 2. The MCE maintains the

routes of VPN 1 and those of VPN2 in two different routing tables. In this way, routes from different
VPNs are separated.

Configure routing between MCE and PE 1.
# The MCE uses port Ten-GigabitEthernet 1/0/3 to connect to PE's port Ten-GigabitEthernet
1/0/1. Configure the two ports as trunk ports, and configure them to permit packets carrying

VLAN tags 30 and 40 to pass.

[MCE] interface Ten-GigabitEthernet 1/0/3

[MCE-Ten-GigabitEthernet1/0/3] port link-type trunk

[MCE-Ten-GigabitEthernet1/0/3] port trunk permit vlan 30 40

[MCE-Ten-GigabitEthernet1/0/3] quit

# Configure port Ten-GigabitEthernet1/0/1 on the PE.

[PE1] interface Ten-GigabitEthernet 1/0/1

[PE1-Ten-GigabitEthernet1/0/1] port link-type trunk

[PE1-Ten-GigabitEthernet1/0/1] port trunk permit vlan 30 40

[PE1-Ten-GigabitEthernet1/0/1] quit

# On the MCE, create VLAN 30 and VLAN-interface 30, bind the VLAN interface with VPN
instance vpn1, and configure an IP address for the VLAN interface.

[MCE] vlan 30

[MCE-vlan30] quit

[MCE] interface vlan-interface 30

[MCE-Vlan-interface30] ip binding vpn-instance vpn1

[MCE-Vlan-interface30] ip address 30.1.1.1 24

[MCE-Vlan-interface30] quit

# On the MCE, create VLAN 40 and VLAN-interface 40, bind the VLAN interface with VPN
instance vpn2, and configure an IP address for the VLAN interface.

[MCE] vlan 40

[MCE-vlan40] quit

[MCE] interface vlan-interface 40

[MCE-Vlan-interface40] ip binding vpn-instance vpn2

[MCE-Vlan-interface40] ip address 40.1.1.1 24

[MCE-Vlan-interface40] quit

# On PE 1, create VLAN 30 and VLAN-interface 30, bind the VLAN interface with VPN instance
vpn1, and configure an IP address for the VLAN interface.

[PE1] vlan 30

[PE1-vlan30] quit

[PE1] interface vlan-interface 30

[PE1-Vlan-interface30] ip binding vpn-instance vpn1

[PE1-Vlan-interface30] ip address 30.1.1.2 24

[PE1-Vlan-interface30] quit

# On PE 1, create VLAN 40 and VLAN-interface 40, bind the VLAN interface with VPN instance

vpn2, and configure an IP address for the VLAN interface.

[PE1] vlan 40

[PE1-vlan40] quit

[PE1] interface vlan-interface 40

[PE1-Vlan-interface40] ip binding vpn-instance vpn2

[PE1-Vlan-interface40] ip address 40.1.1.2 24

This manual is related to the following products:

H3C S5830V2 Series Switches