Connecting a dc power cord, Ee callout 1 in, Figure 9 – H3C Technologies H3C S5800 Series Switches User Manual
Page 13: Out 2 in, Figure
8
Figure 9 Connecting an AC power cord 2
Connecting a DC power cord
1.
Keep the upside of the DC plug shipped with the device on top and plug it in the DC receptacle
(see callout 1 in
). (If you plug it with the upside down, the insertion is not smooth
because of the specific structure design of the DC receptacle and the plug.)
2.
Use a flat-blade screwdriver to fasten the two screws on the DC plug to secure the plug to the DC
receptacle (see callout 2 in
3.
Connect the two cables on the other end of the DC power cord to the external power supply
system.
Figure 10 Connecting a DC power cord
1
2
2
This manual is related to the following products: