H3C Technologies H3C S6800 Series Switches - Manual (Page 22)

15
− Select For FTP from the Network list, VM1 VSI from VSI Type, and VM1 VSI (V1) from VSI
Type Version.
iv Click OK.
The connection VM1CON is displayed in the Connection List page, as shown in
Figure 8 .
Figure 8 Connection List page
4. Verify the configuration:
After VM 1 starts, the VAN Connection Manager service component of IMC deploys the VSI type
VM1 VSI on EVB bridge 1. Only the R&D center can use the FTP service on VM 1.