H3C Technologies H3C S6800 Series Switches - Manual (Page 20)

13
3. Configure the NMS:
Use VAN Connection Manager of IMC on the NMS to configure network resources.
The IMC VCM 5.2 (E0401L01) version is used in this section.
Figure 4 VAN Connection Manager
To configure the NMS, log in to IMC, click the Resource tab, and select VAN Connection Manager
from the navigation tree (see
Figure 4 ), and perform the following steps:
a. Add an EVB bridge (Edge Switch):
Select Edge Switch from the navigation tree, click Add on the page that appears, select the four
devices in the IP address range of 192.168.1.11 through 192.168.1.14 from IP View, and
click OK.
EVB bridge 1, EVB bridge 2, EVB bridge 3, and EVB bridge 4 are displayed in the Edge Switch
List page, as shown in
Figure 5 .
Figure 5 Edge Switch List page
b. Add an FTP network: