H3C Technologies H3C S7500E Series Switches - Manual (Page 3)

Preface
The H3C S7500E documentation set includes 12 configuration guides, which describe the software
features for the H3C S7500E Series Ethernet Switches and guide you through the software
configuration procedures. These configuration guides also provide configuration examples to help you
apply software features to different network scenarios.
The OAA Configuration Guide describes OAA fundamentals and configuration. It describes how to log
in to the H3C open application platform (OAP) card connected to your switch and reset the operating
system of the OAP card, and configure the ACFP and ACSEI protocols to exchange information
between your switch and the OAP card.
This preface includes:
z Audience
z Document Organization
z Conventions
z About the H3C S7500E Documentation Set
z Obtaining Documentation
z Documentation Feedback
Audience
This documentation is intended for:
z Network planners
z Field technical support and servicing engineers
z Network administrators working with the S7500E series
Document Organization
The OAA Configuration Guide comprises these parts:
OAP Card Configuration ACFP Configuration ACSEI Configuration
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
italic Italic text represents arguments that you replace with actual values.
[ ]
Square brackets enclose syntax choices (keywords or arguments) that are
optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars,
from which you select one.