Ensemble Designs BrightEye 57 3G/HD/SD/Analog Test Signal and Sync Pulse Generator - Manual (Page 37)

www.ensembledesigns.com BrightEye 57
TM BrightEye 57 3G/HD/SD/Analog Test Signal and Sync Pulse Generator User Guide
Page 37
Specifications
Reference Input
Number
One
Signal Type 1V P-P PAL, NTSC, 10 MHz or Tri Level Sync
Return Loss >40 dB to 5.5 MHz
Composite Output
Number Two
Signal Type
NTSC / PAL
Impedance 75 Ω
Return Loss >40 dB to 5.5 MHz
Frequency Response -0.1 dB 10 KHz to 5.0 MHz
Output DC
±50 mV
K Factor <1.0%
Differential Phase <1.0 degree
SCH Phase ±5 degrees
Accuracy and Timing Stability
Internal
TCXO
PAL Fsc 4.43361875 MHz +/- 1 Hz
NTSC Fsc 3.579545 MHz +/- 1 Hz
601 Fs 27.000000 MHz +/- 5 Hz
Long Term Drift <1 ppm/year
Analog Jitter <1 ns
Digital Jitter <0.2 UI (0.13 UI typical)
Serial Digital Output
Number Two
Signal Type
270 Mb/s SD Serial Digital (SMPTE 259M)
1.485 Gb/s HD Serial Digital (SMPTE 274M, 292M or 296M)
2.97 Gb/s HD Serial Digital (SMPTE 424M, 425M)
Return Loss >15 dB for 270 Mb/s
>15 dB for 1.485 Gb/s
Max Cable Length 300 meters for 270 Mb/s
100 meters for 1.485 Gb/s
70 meters for 2.97 Gb/s
(Belden 1694A)
Tri Level Sync Output
Number
Two, 75 Ω
Output DC ±50 mV
Return Loss >30 dB to 30 MHz