Troubleshooting, No signal output, Troubleshooting 35 – Ensemble Designs BrightEye 57 3G/HD/SD/Analog Test Signal and Sync Pulse Generator User Manual
Page 35
www.ensembledesigns.com
BrightEye 57
TM
BrightEye 57
3G/HD/SD/Analog Test Signal and Sync Pulse Generator User Guide
Page 35
Troubleshooting
As a troubleshooting aid, the reference signal status and presence, power and CPU status can be easily
monitored from the front panel using the front panel indicators.
Refer to the overall troubleshooting tips given below for the BrightEye 57.
No signal output
•
Check that the expected signal output matches the output selected in the Format Menu.
•
Check the configuration of Ref Mode in the Config Menu. Make sure that the appropriate
setting (Internal or Genlock) is selected for the expected signal output.
You may also refer to the technical support section of the Ensemble Designs web site for the latest
information on your equipment at the URL below:
http://www.ensembledesigns.com/support