Ensemble Designs 6010 Four Channel 24-bit Audio ADC - Manual (Page 9)

In the Ch 1/2 Menu shown below, set the following parameters:
• Ch 1/2 Mode - set the operating modes for Channels 1 and 2.
Choose from 2-Channel (Ch 1 and 2 will be independent), Stereo (Ch 1/2 will be a
stereo pair) or Quad Tracking (Ch 1-4 will track together). Note that if you have
set Ch 3/4 in the next menu to Quad Tracking or the Quad On function is
enabled on the Quad Menu, this selection will default to Quad Tracking.
• Ch 1 Digital Ref - sets the Digital Output Reference level to match the studio
reference for channel 1 (in 2-Channel mode), Ch 1/2 if in Stereo mode or all four
channels together if in Quad Tracking mode.
• Ch 1 Analog Ref - sets the Analog Input Reference level from -10dBu to +8dBu (in
0.5dBu steps) for channel 1 only (in 2-Channel mode), Ch 1/2 if in Stereo mode or
all four channels if in Quad Tracking mode.
• Ch 2 Dig Ref - When Ch 1/2 Mode is set to 2-Channel, this will adjust Channel
2 Digital Output Reference level only. If Ch 1/2 Mode is set to Stereo, adjustment
will affect the stereo pair, or if set to Quad Tracking, adjustment will affect all
channels.
• Ch 2 Analog Ref - When Ch 1/2 Mode is set to 2-Channel, this will adjust
Channel 2 Analog Input Reference level only. If Ch 1/2 Mode is set to Stereo,
adjustment will affect the stereo pair, or if set to Quad Tracking, adjustment will
affect all channels.
In this menu, the following indicators are available:
• Sampling Frequency - will indicate what frequency the module is locking to,
either External Lock or 48kHz (internal).
• Clip Domain - will indicate where clipping will occur (in the analog or digital
domain).
• Ref Level - illuminates green when signal is reaching the Digital Output
Reference level chosen.
• D Clip1/2 - Black indicates signal is below digital clipping; Red indicates digital
signal is clipping. A grayed out box indicates that digital clipping cannot occur and
analog clipping will not be indicated.
Model 6010 Four Channel 20-bit Audio ADC
6010-9