Ensemble Designs 6010 Four Channel 24-bit Audio ADC - Manual (Page 15)

In the Ch 4 Menu shown below, set the following parameters:
• Ch 3/4 Mode - set the operating modes for Channels 3 and 4.
Choose from 2-Channel (Ch 3 and 4 will be independent), Stereo (Ch 3/4 will be a
stereo pair) or Quad Tracking (Ch 1-4 will track together). Note that if you have
set Ch 1/2 to Quad Tracking or the Quad On function is enabled on the Quad
Menu, this selection will default to Quad Tracking.
• Ch 4 Dig Ref - When Ch 3/4 Mode is set to 2-Channel, this will adjust Channel
4 Digital Output Reference level only. If Ch 3/4 Mode is set to Stereo, adjustment
will affect the stereo pair, or if set to Quad Tracking, adjustment will affect all
channels.
• Ch 4 Analog Ref - When Ch 3/4 Mode is set to 2-Channel, this will adjust
Channel 4 Analog Input Reference level only. If Ch 3/4 Mode is set to Stereo,
adjustment will affect the stereo pair, or if set to Quad Tracking, adjustment will
affect all channels.
Refer to the Sampling Frequency, Clip Domain, Ref Level and D Clip indicator
descriptions in the Channel 1 menu.
Model 6010 Four Channel 20-bit Audio ADC
6010-15