Ensemble Designs 6010 Four Channel 24-bit Audio ADC - Manual (Page 14)

In the Ch 3 Menu shown below, set the following parameters:
• Ch 3/4 Mode - set the operating modes for Channels 3 and 4.
Choose from 2-Channel (Ch 3 and 4 will be independent), Stereo (Ch 3/4 will be a
stereo pair) or Quad Tracking (Ch 1-4 will track together). Note that if you have
set Ch 1/2 to Quad Tracking or the Quad On function is enabled on the Quad
Menu, this selection will default to Quad Tracking.
• Ch 3 Digital Ref - sets the Digital Output Reference level for Channel 3 (in
2-Channel mode). If Ch 3/4 Mode is set to Stereo, adjustment will affect the
stereo pair, or if set to Quad Tracking, adjustment will affect all channels.
• Ch 3 Analog Ref - sets the Analog Input Reference level from -10dBu to +8dBu (in
0.5dBu steps) for channel 3 only (in 2-Channel mode). If Ch 3/4 Mode is set to
Stereo, adjustment will affect the stereo pair, or if set to Quad Tracking, adjust-
ment will affect all channels.
Refer to the Sampling Frequency, Clip Domain, Ref Level and D Clip indicator
descriptions in the Channel 1 menu.
Model 6010 Four Channel 20-bit Audio ADC
6010-14