Ensemble Designs 6030 Video-Reference AES/ Word Clock Generator - Manual (Page 9)

Avenue PC Remote Configuration
The Avenue PC remote control menus for this module are illustrated and explained in this
section. Refer to the 6030 Parameter Table shown earlier for a summary of available
parameters that can be set remotely through the menus illustrated. For more information
on using Avenue PC, refer to the Avenue PC Control Application Software data pack that
came with the option.
6030 Avenue PC Menus
In the Main Menu shown below, set the following parameters:
• Video Standard – select a video standard conforming to NTSC or PAL
standards.
• Lock Mode – set module lock to Auto Switch (AES output will lock to reference
video if available or internal crystal if no reference video) or Internal (AES output
will always lock to internal crystal).
• Ref Source – set the module reference to be Module Ref (Reference video will
will be supplied to BNC 1 on the rear module backplane) or Tray Ref (Reference
will be supplied by the common input reference from the Master Reference Input
BNC on the frame backplane. System Control Module is required for this function.)
• Loss of Ref – choose either Free Run (AES output will free-run using the
internal crystal if reference video is lost and Lock Mode is set to Auto Switch) or
Mute Output (AES output will be muted if reference video is lost and Lock Mode
is set to Auto Switch).
Model 6030 Video-Referenced AES/Word Clock Generator
6030-9