beautypg.com

Ensemble Designs 7600 HD/SD Embedder/Disembedder User Manual

Page 6

background image

INSTALLATION

Plug the 7600 module into any slot in the 1 RU or 3 RU frame and install the plastic
overlay provided onto the corresponding group of rear BNC connectors associated with the
module location. Note that the plastic overlay has an optional adhesive backing for
securing it to the frame. Use of the adhesive backing is only necessary if you would like
the location to be permanent and is not recommended if you need to change module
locations.

This module may be hot-swapped (inserted or removed) without powering down or dis-
turbing performance of the other modules in the system.

CABLING

Refer to the 3 RU and 1 RU backplane diagrams of the module on the following page for
cabling instructions. Note that unless stated otherwise, the 1 RU cabling explanations are
identical to those given in the 3 RU diagram.

Model 7600 HD/SD AMD

7600-6