Ensemble Designs 7600 HD/SD Embedder/Disembedder - Manual (Page 10)

Remote/Local switch:
Set to the mode you will be using.
SDI In:
Video green LED:
ON indicates module is locked to a
valid input signal.
OFF indicates no valid video input
is present
.
Audio green LED:
ON indicates module detects
embedded audio.
OFF indicates no embedded audio
detected
.
Pwr green LED:
Indicates the presence (ON) or
(OFF) of power (+5V or -12V).
Run green LED:
OFF:
A power fault or halted CPU
ON:
A halted CPU
FAST BLINK:
CPU Run error
SLOW BLINK:
System OK. (If SPI control is
active from the main frame
System Control Module, all
Run indicators will be syn-
chronized.).
AES Audio:
1/2, 3/4, 5/6, 7/8 In green LEDs:
ON when AES audio is detected
on channels.
OFF when no AES audio is
detected on channels.
AES/SDI In:
Set to AES (left) for external AES
audio or SDI (right) for demuliplexed
audio from the input SDI stream.
Mux On:
Set multiplexing On (left) or Off (right)
Audio Group A:
Set to GP0 (left) or GP1 (right).
Audio Group B:
Set to GP0 (left) or GP1 (right).
Front Panel Controls and Indicators
Each front edge indicator and switch setting is shown in the diagram below:
Model 7600 HD/SD AMD
7600-10