Ensemble Designs 7600 HD/SD Embedder/Disembedder - Manual (Page 20)

Use the Aud Mix A menu below to control the audio mixing and shuffling of Input
Channels 1 through 4. Each output bus assignment will be indicated by a green box.
• Input Ch 1 – assign Input Channel 1 to the desired output bus or tie to Channel 2
and set the input level using the slider control or by entering a number
(-70 to +12 dB) using the pop-up key pad and pressing Enter.
• Input Ch 2 – assign Input Channel 2 to the desired output bus or tie to Channel 1
and set the input level using the slider control or by entering a number
(-70 to +12 dB) using the pop-up key pad and pressing Enter.
• Input Ch 3 – assign Input Channel 3 to the desired output bus or tie to Channel 4
and set the input level using the slider control or by entering a number
(-70 to +12 dB) using the pop-up key pad and pressing Enter.
• Input Ch 4 – assign Input Channel 4 to the desired output bus or tie to Channel 3
and set the input level using the slider control or by entering a number
(-70 to +12 dB) using the pop-up key pad and pressing Enter.
Selecting the Tie button in Input Ch 1 or Input Ch 2 will tie the two controls together.
Selecting the Tie button in Input Ch 3 or Input Ch 4 will tie the controls for these
channels together.
Select the Default button to return to the default value.
Select the Invert button to invert the phase of the audio input.
Model 7600 HD/SD AMD
7600-20