Eneo VHM/ZLB-W - Manual (Page 26)

6
8. Technical Data
Model VHM/ZLA-W
Weather-proof housing
with main connector and
230V heater
VHM/ZLB-W
Weather-proof housing
with main connector and
24V heater
VHM/ZLKCB-W
Weather-proof housing
with central plug
connector and 24V
heater, pre-configured
Art. No. 7968 7968 79683
Installed length overall 330mm
Space required for the
mains power supply unit NE- (VDC or 4VAC):
85mm; NE-/ (DC/
4VAC): 0mm
–
Cable entry M5 x .5mm (for 9 ~ 7mm diameter cable)
Cable connection Terminal board - see accessories list –
Viewing pane „Clear shield” coating
This coating prevents corrosion caused by environmental effects and extends times
between cleaning the pane.
The coating is UV-resistant, neutral in colour and causes no loss of transmission.
Power supply voltage 50VAC/50Hz; 300mA / AC 4VAC
Windshild defroster
heating 0-65V / approx. 9W 4V (convertible to V), approx. 6W
Thermostat On: +6ºC; Off: +0ºC (contained in the #79609 terminal board and power supply unit)
Temperature range
(only housing) -30ºC to +60ºC (with disk heater)
Sun shield Yes
Housing Aluminium
Colour RAL906
Protection system IP 66
Noise generated <70dBa
Supply items Attachment screw set,
Main connector casing with a 30 pin multipoint plug
The central plug is inside
assigned with connection
cable. Camera and lens
connection are prepared.
Dimensions See the dimensional drawing
Weight .9kg
9. Dimensional drawings
See Page 5
Optional Accessories
The optional accessories currently available can be found on our Homepage: www.videor.com