ATL Telecom IP300S - Manual (Page 76)

IP SIP Phone v2 User’s Guide Mar. 2005
[76/100]
12.1.2. Access Voice Mail
To access voice mail, press the 【MWI】 button and follow the voice instructions. The red
LED adjunct to the 【MWI】button also will be flashing whenever you have unread and/or new
voice messages (Message Waiting Indication) in your voice mailboxes.
Note, when the MWI LED is off while pressing【MWI】, it will dial to the voice mailbox
your configured. However, when the MWI LED is flashing and you press 【MWI】, it will make
a call to the Message-Account stipulated on the latest NOTIFY message it received (if this field
is absent or is not a SIP AoR, the AoR in request is used instead). If there are unsolicited
out-of-dialog NOTIFY messages received from different service domains, those voice mailboxes
will be called in turn (in circular fashion) each time 【MWI】is pressed.
12.2. Instant Messaging
IP SIP Phone supports instant short message (255 characters). Its operation is very similar
to the short message on modern mobile phones.
z To take advantage of instant messaging by TELNET or keypad:
a. Press 【 】 FUNC + 【 】 # key to activate menu.
b. Go to submenu “7. Service” / “2. Message “.
z To take advantage of instant messaging by web browser, go to 『Instant Message』page.
Please refer to section-4.10 “Instant Message” on “IP SIP Phone v2 Web Administration” for
detail.