ATL Telecom IP-3092 IP Communicator User Manual
Page 9
Page 9
MOCET IP3092 Communicator Quick User Guide
3
Microphone Input Port RJ9 jack to connect an external microphone for hands
free (conferencing) mode which is operating under
VoIP function.
Note: This port is not necesary for App user.
4
Ethernet LAN Port
RJ45 Ethernet port for VoIP applications
Note: This port is not necesary for App user.
5
Ethernet PC Port
RJ45 Ethernet port for VoIP applications
Note: This port is not necesary for App user.
6
12VDC Power In
2.5mm Jack for external power adapter
7
Console Port
4-pin header for engineering service port
Note: This port is not necesary for App user.
8
Kensington Lock
Mount
For user to luck the Communicator against stealing
9
Micro SD Card Port
For VoIP mode only which is used to store
Communicator firmware, configure file, voice mails,
melody, IVR greeting, etc.
Note: This port is not necesary for App user.
10
USB 2.0 Host Port
This can be used for iPhone charging.
Besides, for VoIP mode only which is to support WiFi
USB dongle, USB Keyboard, or other devices.
Note: This port is not necesary for App user.
11
WiFi AP Router Port Reserved for future WiFi accessory support
Note: This port is not necesary for App user.
12
Wiring Duct
For inserting curly handset cord into the slot
13
Headset Port
3.5mm jack for standard Apple ear buds or headset
Figure 4. The 30-pin Connector for Docking