ATL Telecom IP-3092 IP Communicator - Manual (Page 12)

Page 12
MOCET IP3092 Communicator Quick User Guide
Use Communicator To Play Music/Audio
Now, you can start to use the Communicator for iPad APP. In iPad, there are 2 pathes
supported for delivering audio to Communicator, one by 30-pin connector (USB) or Blue tooth.
And 30-pin USB path is set as default.
Docking with Apple 30-pin Connector:
(1) Charging: When the Communicator powers on and is ready and the iPad is
inserted all the way into the 30-pin connector, the iPad will start charging.
In addition, the user can charge his iPhone or other mobile phone by connect it to
the USB port on the right side of the Communicator.
(2) Tununing the Stand Angle for Video Player: The user can adjust the screen angle
by holding the stand and the base unit and opening or closing the stand to a
comfortable angle, ranging from 30 to 75 degrees (see the figure above). A
convenient angle for use is easy to find for see a movie or have a videoconference.
(3) Play The Audio: By default, all audio from an docked iPad plays through Apple 30-
pin connector onto the speakers, handset or headset of the Communicator.
Audio Path via Bluetooth:
The Communicator supports Bluetooth 2.1 EDR and the A2DP audio profile too for a
wireless connection to the iPad’s audio system.
You can pair your iPad, iPhone or another mobile phone to the Communicator by using
the Bluetooth discovery process on your iPad, iPhone or another mobile phone to find
and associate it to the Communicator. You will see a device ID like IP3092-xxxxxxxxxxx
when finished scanning.
When the iPad, iPhone or other mobile phone is properly paired with the Communicator.
Please don’t pair to the wrong Communicator which has the same IP3092-xxxxxxxx ID.
When connected, you can control the audio output of the iPad, iPhone or other mobile
phone using the volume controls on the Communicator to play music or make a call of
Facetime, Skype or other App using the Communicator’s handset, speakerphone and
headset.
When the Communicator is paired thru Bluetooth, the music or audio will keep playing
even when the iPad/iPone/mobile phone is not connected to the Communicator.
When the iPad is docked successfully on the Communicator, the iPad will use the 30-pin
connector as it supports true wide-band quality for both music and voice calls.
To Run iPad Apps
To Run Music Movie Player APP: