ATL Telecom IP-3092 IP Communicator - Manual (Page 8)

Page 8
MOCET IP3092 Communicator Quick User Guide
Hotline
Press this key to make an emergency call whether the iPad is
attached or not; requires subscription to VoIP service or
connection to an IP PBX. A red LED is used to indicate its
status
Home
Press this key to bring supported apps immediately to the
forefront. A blue LED is used to indicate its status
LEDs on The Communicator
LED Color Status Description
Off Communicator is booted OK.
Message Waiting
Indicator
Blue
Steady The Communicator is booting or updating
Light
Purple
Steady System is under upgrade or abnormal state.
Steady Support HD audio quality
Blinking N/A
Handset
Blue
Off Not support HD audio quality
Speakerphone
Blue
Blue-green LED indicates that speakerphone is enabled
Mute
Blue
Blue-green LED indicates that Mute is enabled
Headset
Blue
Blue-green LED indicates that the headset feature is
enabled
Off Normal condition
Steady On N/A Home
Blue
Flashing 3 sec. iPad inserted or removed
Besides, there is other LED that has nothing to do with App user mode. Please don’t care for
them.
Hotline
Red
N/A (Only supported in VoIP mode)
I/O Port Functions
The front, rear and side view of the Communicator with location of connectors is shown in the
following figures and the description of I/O ports is listed in the table here
. And please refer to
their locations in Figure 4 and 5.
NO. Port Description of I/O Port
1 iPad Docking Port Apple 30-pin connector for iPad on the front shell
2 Handset Port RJ9 jack for attaching handset with curly phone cord