Archgard 31-DVIM33C - Manual (Page 28)

31-DVIM33C
28
ADJUSTING PRIMARY AIR
NOTE: Fig. 28-A is an example of what a correct or incorrect flame pattern looks like. It is not a true
representation of what the 31-DVIE33C will look like in your home environment.
The air shutter can be adjusted from the front of the unit while in operation. All adjustments should
be made after 20 minutes of operation.
1. Locate the Robertson screw below the glass door and left of center.
2. Turn the screw clockwise to give more air ( less yellow flame ). Turn the screw counter clockwise
to give less air (more yellow flame).
FLAMES
The left side shows correct adjustment.
The right side shows yellow sooty
flames requiring increase in shutter
opening or cleaning of shutter area,
due to lint buildup.
Before servicing, read the terms and conditions of the Archgard warranty at the back of the manual.
Contact the authorized Archgard dealer where you purchased the appliance from and provide them
with details of the problem, along with the initial installation information (from the front of this manual).
SERVICING UNDER WARRANTY
Fig. 28-A
W A R N I N G
Servicing of this appliance must be conducted by a qualified service technician. Improper
servicing, adjustment or alteration of this appliance may cause property damage, personal injury or
loss of life. All servicing should be conducted with the appliance cold. All replacement parts must be
authorized by Archgard for suitability.