Amped Wireless SR10000 - High Power Wireless-N 600mW Range Extender - Manual (Page 50)

SR10000 USER’S GUIDE
49 49
router. Once you have it, connect to the Range Extender using an Ethernet cable. Open your web
browser and enter the IP address into the address bar.
c. Reset the Range Extender back to default settings and try the Wizard again. To reset the Range Extender
back to default settings, push the Reset Button (on the back panel) down for five (5) to ten (10) seconds
then let go. After the Range Extender has fully reset, use an Ethernet cable and connect to the Range
Extender. Login to the Web Menu at
http://setup.ampedwireless.com and run through the Wizard.
The connection to the Home Network seems slow. File transfers take a long time to transfer.
a. You may be too far away from your Home Network. The closer the Range Extender is to your Home
Network, the better its connection will be. The Range Extender must have a strong signal in order to
extend the signal with fast speeds and further range. Move the Range Extender closer to your Home
Network and try again.
b. You may be downloading from the Internet and not within your Home Network or Extended Network.
Files transferred through the Internet are limited by your ISP speed and the data download speeds from
the website that you are downloading from.
c. Your computer may be using an older Wi-Fi adapter with lower speed limits (802.11b/g).