Amped Wireless SR10000 - High Power Wireless-N 600mW Range Extender User Manual
Page 48
SR10000
USER’S GUIDE
47
47
I am connected to a Home Network, however, I do not have Internet Access.
a. The Home Network itself may not have Internet access. Check to see that you have internet access by
connecting directly to the Home Network first. If you are able to go online then this is not a problem. If
you cannot go online, then the Home Network’s Internet connection must first be resolved.
b. You may have a DNS issue and the Range Extender is not obtaining the IP settings from your Home
Network. Try to reboot the Range Extender and then accessing a website. If that fails, then reboot the
Home Router to see if that fixes it.
c. There may be an IP conflict with your Home Network and your Extended Network. Try to adjust the IP
Settings of your Extended Network using IP values that are different from your Home Network.
I can no longer connect to the Range Extender wirelessly.
a. Power on and off the Range Extender and try again.
b. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to the
Range Extender. Acces
and run through the Wizard again. After you
have successfully reset the Home Network connection, try connecting wirelessly again.