Amped Wireless APA20 - High Power 700mW Dual Band AC Wi-Fi Access Point - Manual (Page 49)

AP20000G USER’S GUIDE
48
DEFAULT SETTINGS
The default settings for your Access Point are listed here. If for some reason you need to return your Access
Point back to default settings, hold down the Reset button on the back panel for 10 seconds. The Access Point
will reset back to factory settings as listed below:
IP Address: 192.168.80.240
Web Menu Access: http://setup.ampedwireless.com
5.0GHz Wireless SSID: Amped_APA20_5.0
Wireless Security Key (WPA/WPA2 Mixed Mode): wireless
2.4GHz Wireless SSID: Amped_APA20_2.4
Wireless Security Key (WPA/WPA2 Mixed Mode): wireless