AEC Econo-Cool Chillers - Manual (Page 34)

AEC Water Temperature Control Units Page 33
AT
AT Key
Press and hold the
AT
AT key for two seconds to initiate or to
stop the auto-tune function.
Display Key
The functions of the Display key change, based on how
long you press it. Press the Display key for less than one (1)
second to scroll through parameters within the mode. Press the
Display key for at least one (1) second or more to display the
menu; the Display function also lets you select the mode you need
to adjust.
Important!
Do not change any of the control settings
without consulting AEC’s Service Department.
AEC warranty does not cover chiller failures
from tampering with controller settings!
Down Key
Each press of the Down Arrow key decrements or reduces
the values or settings on the SV Set Value display.
Up Key
Each press of the Up Arrow key increments or advances
the values or settings on the SV Set Value display.
4-5 Using Graphic Panel Buttons
ON/OFF Switch
Push the ON/OFF rocker switch to the ON ( | )energize the unit and begin the
temperature control cycle. The switch will be illuminated whenever the unit is on.