ACTi INR-310 - Manual (Page 6)

6 Standalone NVR QIG
START-UP
CREATE HARDWARE RAID
1. On the unit’s front panel, press down Power Button to turn on the unit.
2. As this unit starts up, you will enter Windows logon screen. Input the password
“123456“ to log in as administrator.
As INR-320 supports hardware RAID configuration, you can make disk arrays
using the bundled software utility.
1. On Windows Desktop, double-click on the shortcut to initialize the
RAID management utility.
2. On Basic RAID Configuration tab, select a RAID type and click on “Apply“.
3. After the configuration is complete, the RAID information will appear.
Note
Before removing or
inserting the hard disk
trays, please make
sure the unit is turned
off.
Moving the trays while
the unit is operating
can cause damage to
the disk.