ACTi INR-310 - Manual (Page 11)

Standalone NVR QIG 11
4. On New Volume Wizard window, make sure you assign the desired drive
letter and give a proper label name to this volume.
5. After the volume is created, it is shown on volume list and is ready for
recording.
Note
To make a Striped volume, a Mirrored volume or a RAID-5 volume, it is
recommended to select disks of the same model and capacity.
Note
For detailed instructions on choosing the RAID types and troubleshooting
hard disk issues, please refer to System Administrator’s manual provided on
ACTi Download Center at http://www.acti.com/downloadcenter