ACTi INR-310 - Manual (Page 13)

Standalone NVR QIG 13
SELECT STORAGE DRIVES
1. Go to Setup page and then Storage tab.
2. On Disk Drive List, de-select C Drive, and select other storage drives.
3. Click “Apply“.
ADD CAMERAS
1. Go to Setup page and then Devices tab.
2. Click “Add”.
3. Choose
a search method
based on your
network environment
and camera brand.
Search Cameras
Use “Search Cameras” to auto-search
the network for ACTi cameras, or “Search
ONVIF Cameras” for ONVIF-compliant
cameras of any brand. After selecting
your desired cameras, click “Apply”.
Add Camera Manually
If you are adding a camera located in
another network, use “Add Camera
Manually”. Fill in Media Type, Proto-
col, IP Address, HTTP Port, Account
and Password. Finally, click “Get Device
Settings” and then “Apply”.
To find ONVIF-compliant
cameras, input the correct
account and passowrd first,
and then click to start
searching.