beautypg.com

ACTi Outdoor Mini PTZ Dome on Dropped Ceiling User Manual

Page 9

background image

www.acti.com

Installation Guide

9

6.

Insert the sealing insert with claw into the cable gland body and then attach the clamping nut

to complete the cable solution. Same procedures apply to cable passing the surface or along

the surface.

NOTE:

Make sure the clamping nut is tightly attached to the cable gland body and the sealing

insert is squeezed tightly.

7.

Connect the network cable to the Ethernet port of the camera.

8.

In case a memory card will be used for local recording, see

How to Insert the Memory Card

on page 19 and follow the procedures to install a memory card. Otherwise, skip this step.

9.

Proceed with

Step 4: Install the Camera to the Surface

on page 15.

This manual is related to the following products: