Step 4: install the camera to the surface, Step 5: close the dome cover – ACTi Outdoor Mini PTZ Dome on Dropped Ceiling User Manual
Page 15
Installation Guide
Step 4: Install the Camera to the Surface
Align the camera screw holes and the cable hole (if necessary) to the holes on the surface and
attach the three (3) supplied screws (with rubber) to secure the camera.
CAUTION:
When using electric screwdrivers,
be careful not to touch the internal
camera components while attaching the screws. Since electric screwdrivers vary in sizes,
speed, and force, they may bruise and damage the internal camera components.
DISCLAIMER:
ACTi will
not be responsible for camera damage caused by improper
installations or the misuse of equipment for installation.
Step 5: Close the Dome Cover
1.
Tighten the three (3) screws to attach the dome cover to the camera body.
This manual is related to the following products: