ACTi Outdoor Dome (B8xI8x) on Tilted Wall with Gang Box Converter - Manual (Page 4)

www.acti.com
Installation Guide
4
Step 1: Prepare for Waterproof Installation
The camera comes with two (2) glands used for waterproof installation:

Cable Gland : For use with an Exterior-grade Ethernet cable . Exterior-grade Ethernet
cables are already waterproof. Note that throughout this documentation, this solution is
referred to as the Waterproof Solution with Naked Cable .

Conduit Gland : For use with a flexible conduit. This solution is recommended when an
exterior-grade Ethernet cable is not available or other cables, such as power adapter,
DI/DO devices, etc., will be connected to the camera. Note that throughout this
documentation, this solution is referred to as the Waterproof Solution with Conduit .
1. Determine the type of waterproof solution that is applicable to your installation requirements
and prepare the necessary accessories or purchase extra materials.
Cable Gland Conduit Gland
For use with an Exterior-grade Ethernet
cable (not included in the package).
For use with 1/2” flexible conduit (not
included in the package)