Step 10: close the dome cover – ACTi Outdoor Dome (B8xI8x) on Tilted Wall with Gang Box Converter User Manual

Page 19

background image

Installation Guide

Step 10: Close the Dome Cover

1.

Tighten the three (3) screws to attach the dome cover to the camera body.

2.

Remove the plastic covering the dome cover. Final installation will look like the illustration

below.

This manual is related to the following products:

Outdoor Hemispheric / Fisheye Dome on Tilted Wall with Gang Box Converter Outdoor Hemispheric / Fisheye Dome on Dropped Ceiling with Gang Box Converter Outdoor Hemispheric / Fisheye Dome on Hard Ceiling with Gangbox Converter Outdoor Hemispheric / Fisheye Dome on Straight Wall with Gang Box Converter Outdoor Dome (B8xI8x) on Tilted Wall Outdoor Dome (B8xI8x) on Straight Wall Outdoor Dome (B8xI8x) on Straight Wall with Gang Box Converter Outdoor Dome (B8xI8x) on Hard Ceiling with Gang Box Converter Outdoor Dome (B8xI8x) on Dropped Ceiling with Gang Box Converter